RenewConcreteOKC™
High-gloss polished concrete floor reflecting light from tall windows

OKC concrete restoration

Your old concrete,
made new.

We grind, repair, and finish the concrete you already have: polished floors for homes, shops, and warehouses, garage epoxy, and dry basements. No tear-out, and the dust goes into the vacuum, not your building.

Get a free estimate Call (405) 252-0426

What we do

Three ways to renew a slab

Planetary floor grinder connected by hose to a HEPA dust extractor with a cyclone pre-separator on a polished concrete slab
01

Polished concrete

We grind the slab with Husqvarna diamonds, densify it, and polish it to the Husqvarna Superfloor™ finish you choose, from a soft satin to a Platinum high gloss. The result is hard, easy to clean, and built to last for decades.

  • Basements, garages, and shops
  • Warehouse, storage, retail, and showroom floors
  • Crack and joint repair before polishing
  • Removal of old coatings, glue, and tile adhesive
Two-car garage with a glossy gray flake epoxy floor
02

Garage epoxy floors

Most coating failures come from poor preparation. We diamond-grind the floor to open the concrete, repair cracks and pits, and then apply a flake epoxy system that resists hot tires, oil, and Oklahoma weather.

  • Diamond-ground surface prep (no acid etching)
  • Full-broadcast flake in your choice of color blend
  • Clear topcoat for gloss and easy cleaning
Clean basement with an interior drainage channel along the wall and a sump pit
03

Basement waterproofing

Older OKC homes often have damp or leaking basements. We find where the water is coming from and fix it, so the space is dry enough to use, store, or finish.

  • Crack injection and wall sealing
  • Interior drainage and sump pump systems
  • Floor sealing and moisture control
Warehouse aisle with a polished gray concrete floor reflecting overhead lights between tall pallet racks

Warehouses and storage facilities

Floors that clean faster and are safer to drive on

Worn warehouse concrete sheds dust onto racks and inventory, holds dirt, and gets rough at the joints where forklifts cross. We grind, repair, densify and polish the slab you already have, so it's easier to keep clean and smoother for the equipment that runs on it every day.

Schedule a facility walk-through Call (405) 252-0426

  • Less concrete dust

    Densifying hardens the top of the slab so it stops dusting onto stored goods, racking, and equipment.

  • Easier to clean

    A tight, polished surface sweeps and scrubs faster, and spills stay on top instead of soaking in.

  • Smoother forklift traffic

    We repair cracks, spalls, and worn joints so forklifts and pallet jacks roll over them with fewer bumps, jolts, and dropped loads.

  • Brighter aisles

    A polished floor reflects the overhead lights, which helps visibility in aisles. We pick a finish level that balances shine with traction for your traffic.

Built for working facilities. We phase the work by aisle or zone so your operation keeps running, and our HEPA dust extractors capture the grinding dust. We serve warehouses, self-storage, distribution and light industrial buildings, and shops. On larger floors we can polish a test area first so you can see the finish before you commit.

Husqvarna Superfloor™ system

One system, from first cut to final shine

We polish with Husqvarna equipment from start to finish: grinders, HEPA dust extractors, diamond tools, and floor chemicals that are designed to work together. Husqvarna Superfloor™ is Husqvarna's complete polished concrete system, and each finish is measured against set targets for smoothness, gloss, and clarity, not judged by eye.

  1. Satin

    Soft sheen

    Fine "salt and pepper" aggregate. Gloss above 20 GU.

  2. Silver

    Matte

    Medium aggregate exposure with a low-glare surface. Gloss below 10 GU.

  3. Gold

    High gloss

    Fine "salt and pepper" aggregate. Gloss above 50 GU.

  4. Platinum

    High gloss

    Medium aggregate exposure with a mirror-like reflection. Gloss above 50 GU.

Targets from Husqvarna's Superfloor guides. We agree on the finish and the targets with you in writing before work starts.

Ask about the Superfloor™ warranty

Floors installed to the Superfloor™ process by a Husqvarna-certified contractor, using only Husqvarna equipment, tools, and chemicals, can qualify for Husqvarna's Superfloor™ floor warranty. Eligibility depends on the slab and the finish, and the floor must be maintained to Husqvarna's care instructions. We'll tell you up front whether your project qualifies and put the terms in your quote.

How a job works

From first look to finished floor

  1. 1

    Free evaluation

    We visit, test the slab's hardness and moisture, and look at cracks, coatings, and water issues.

  2. 2

    Clear written quote

    You get a scope, price, and schedule in writing before any work starts.

  3. 3

    Dust-controlled work

    Our Husqvarna grinders run with Husqvarna HEPA dust extractors, and we protect walls, doors, and the rest of your home.

  4. 4

    Walkthrough and care

    We walk the finished floor with you and leave simple care instructions.

Hands-on training

Trained on the real thing

Our team completed Aramsco's two-day hands-on training in Miami on concrete polishing and epoxy finishes. These photos are from that training, from the first grinding pass to the final coat.

Planetary grinder with dust extraction hose during a grinding pass
Grinding with HEPA dust extraction
A gray patch repair ground flush with the surrounding slab, which shows exposed aggregate after grinding
Patch repair ground flush, with exposed aggregate
Polished concrete reflecting shop lights next to a grinder head
Polished finish with gloss
Sealer applied to a taped-off square of polished aggregate
Guard and sealer test area
Installer rolling a gray epoxy coat inside a taped-off area
Rolling an epoxy base coat
Finished speckled coating section on a shop floor
Finished coating sample

Why Renew Concrete

Professional equipment, done right

We're a local Oklahoma City company that focuses only on concrete surfaces. We don't pour driveways or sidewalks. We make existing concrete look and perform like new.

Husqvarna equipment
Husqvarna planetary grinders, HEPA dust extractors, diamonds, and chemicals, sized for homes and commercial floors.
Trained crews
Aramsco hands-on training in concrete polishing and epoxy finishes.
Industry member
Member of the Mason Contractors Association of America.
Residential and commercial
One crew for homes, one for small and mid-size commercial floors.

Free estimate

Tell us about your floor

Send a few details and we'll follow up to set up a free evaluation. Photos help, so feel free to reply with them once we're in touch.

We reply within one business day. Want to pick a meeting time? Schedule a meeting.